Fiberglass/ Carbon Fiber Stocks

 This stock is a variation of our famous A-3 stock but with the addition of an A-5 type butt hook on the bottom of the butt. The flat on the bottom of the hook is about 3/4” wide. This stock is only available with an adjustable cheekpiece which gives both vertical and horizontal adjustments and is available with either the standard or thumbwheel system. 

The ELR Hunter Adjustable rifle stock was designed for hunters that are ready to push the limits.  It includes a light weight adjustable cheek piece that has over 1” of adjustability, allowing users to achieve the optimal height for their scope setup.  The ELR Hunter rifle stock was developed with versatility in mind and features a low profile picatinny rail and integrated ARCA rail making it a stable platform whether shooting from a bipod, tripod or improvised surface.  Its vertical grip, ambidextrous thumb shelves and forend index points provide a superior ergonomic interface with your rifle.

 The A-3 is a modified lightweight version of our popular A-2 stock. It is the most widely used field sniper stock available. It is available with or without an adjustable cheekpiece. The forend is.312 inch shallower than the A-2 from top to bottom to provide a more stable platform while shooting off sand bags or a pedestal. 

 The Remington Hunter is a beautifully designed stock with a Monte Carlo cheekpiece as well as a small palm swell. The uniquely designed fine line checkering adds to the “custom” look of this stock. This stock is patterned after the factory Sako 75 varmint and has been adapted specifically for Remington 700 actions. It has a wide forend that will accept up to a #8 barrel contour. 

 This stock design is compatible with a wide variety of actions. It has a more conventional and vertical pistol grip than some other thumbhole stocks and a slightly lower comb at the front. The medium width forearm can be inletted for sporting contours up to a Remington Varmint and #5 Douglas type contour. Available in right hand only.

 The Game Warden 2.0 is the next generation in our long-range hunting stock line. This fully ambidextrous stock features a tall negative sloping comb to allow shooters to use larger objective scopes while maintaining proper sight picture. The Game Warden 2.0 has a vertical grip, finger stop and integrated thumb-shelves for enhanced ergonomics and repeatable hand placement. 

 The Game Hunter combines the features of the most popular stocks in our hunting line up. It has a high Monte Carlo style cheek piece similar to our McMillan Hunter, the vertical pistol grip from our Game Scout and a streamlined forend that can accommodate large contour barrel up to a #8. The addition of the higher cheek comb allows the use of scopes with larger diameter bells and objective lenses.  

 This stock is a variation of our popular Sako Hunter stock design and is modified to fit most Remington 700 type actions. It has the sculptured Sako type pistol grip with palm swell and a Monte Carlo type butt with some cast off. The RH configuration can be inletted for barrel contours up to about a #5 Douglas size with finished shanks of 1.5” or less.  Also available in true left hand versions inletted up to a #4 barrel contour. 

Designed with balance and safety in mind- not setup to be heavy simply for the sake of being heavy. Manners set out to overcome the issues often associated with heavy competition rifles (slow, cumbersome, unsafe, expensive aftermarket weights, weight loosening over time, etc.). Designed forward heavy from the ground up; utilizing proprietary textile/fill media of different weight & densities to create a “dead in the hand” feel. 

The LRH-NV comes standard with a 3.5” long arca rail, side EFR mounts & the PH/LRH pic rail. The EFR top rail is an add on option, not included.

This stock is fitted with a hybrid version of our popular light adjustable spacer cheek system. While not quite as adjustable as our standard KMW adjustable hardware, you still have the ability to fine tune the stock for that perfect cheek weld.

 At the request of GA Precision, we have produced the MCS-T2A-GAP, an adjustable cheek version of the T2, redesigned for optimal comfort and precision. The bottom is smooth and flat from the front of the trigger guard to the tip of the fore-end. This creates a very wide, flat area in front of the trigger guard. This, along with a thumb shelf, provides added stability on barricades. The grip feels a bit smaller and narrower than the T4A-Team or PRS series stocks. 

 This stock was designed for those that prefer a short, compact stock. The EH4 is based on our popular MCS-T. Although, there are some main differences between the two, including: the forend on this stock is 3.25” shorter; the width is only 1.6” at the tip which is wide enough to accept up to a 5 ½” contour, basically a heavy Remington profile barrel. 

 The MCS-T5A is designed as a right-hand grip, with a small thumb rest on the left side of the stock. This comes standard with a fixed 1″ Pachmyer Decelerator pad. It can also be ordered with the optional butt spacer system and a 1/2″ Decelerator pad .The standard weight is 29 oz, the fore-end is 1.75” wide at the tip, and will take barrels up to #7 contour.

 The MCS-PH-A is engineered to deliver the strongest lightweight product available in a 28.5-31 ounce package. While the butt section has a more traditional, rounded design, the Pro Hunter has many hybrid features, including: comfortable adjustable high cheek weld for long-range hunting optics; flat bottom for extreme stability when shooting in bags; slight inward taper on comb to add comfort for high-recoil calibers; and dual ambidextrous thumb shelves. 

MCS-PPFA (Pro Pack Folder Adjustable) has all the elite design choices of our PPF, now with an adjustable cheek! It was designed with an overall folded length of just 19″ while still maintaining the traditional styling and common features of the MCS line of stocks.  This objective was accomplished by a total redesign of our patent-pending M5-folding-mini chassis which includes the addition of the hinge. The Pro Pack Folder inset hinge does not protrude which allows the pivot point to stay inside of the outside stock lines to keep the overall collapsed width as narrow as possible. 

The quickly deployable butt system adjusts from 11.25” to 14.5” with one push of a button, giving you a choice of 9 rock-solid positions. With a few quick turns of the button, you can lock the system to your desired setting.

The Night Stalker also features our MCS ½” pad which may be adjusted slightly right to left. A machined-in flush cup is standard on the left side. The MCS-NS is the perfect platform for a compact, easily stowed, bolt action rifle.